
Concours Ceramic & Quartz Shield
Waxes evaporate in weeks and polymer sealants break down in harsh detergents. Our Concours Ceramic & Quartz Shield forms an impenetrable, semi-permanent cross-linked glass layer over your factory paintwork. Featuring a 115° water contact angle, dirt slides off effortlessly during routine maintenance washes while your clear coat is guarded against chemical etching, UV fading, and bird dropping damage.
How 9H Ceramic Quartz Protects Against Modern Environmental Hazards
Traditional carnauba waxes sit loosely on the surface of your vehicle and melt under normal engine heat (above 135°F) or wash off after two rainstorms. Ceramic coatings use siloxane polymer nanotechnology that cures into a 3D glass matrix inside the pores of the clear coat.
Once cured, the surface becomes non-porous and ultra-slick. Water and contaminants cannot penetrate or adhere. Brake dust, bug guts, tree sap, and acid rain wash off with gentle contact, dramatically reducing wash marring and eliminating the need for periodic waxing.
Water forms tight spherical droplets that roll off at 35+ mph, taking dirt particles with them.
Withstands temperatures up to 800°F without breakdown, protecting clear coat from sun fading.
Immunity to corrosive chemical etching from road salts, industrial fallout, and bird droppings.
Enhances metallic flake pop and creates a permanent glass-like reflective liquid depth.
Ceramic Coating vs. Traditional Wax
The 5-Step Quartz Bonding Sequence
Ceramic coating is only as good as the preparation and curing protocol. We execute every application in a climate-controlled, dust-free bay.
Pre-Coating Correction
Paint must be machine polished to 95%+ defect-free perfection before coating. Defects underneath cannot be removed once locked in.
Surface Stripping Wipe
Pure solvent and alcohol panel wipe removes all lingering polishing lubricants, waxes, and silicones for 100% bare clear coat bond.
Cross-Hatch Application
Applied panel-by-panel using high-density applicator blocks in a tight horizontal and vertical cross-hatch pattern for even thickness.
Flash Point Leveling
Timed leveling with fresh ultra-plush microfiber towels as the quartz flashes into a rainbow sheen, eliminating high spots.
Infrared Curing Bay
Short-wave infrared heat lamps accelerate the cross-linking process at 160°F, hardening the quartz shell prior to release.
Verified Ceramic Quartz Shield Finishes
Real client supercars and luxury vehicles protected with our 9H liquid quartz matrix.






Ceramic Coating FAQ
Will ceramic coating protect my vehicle from rock chips?
No coating can stop high-speed physical rock impacts. Paint Protection Film (PPF) is required for impact resistance. Ceramic coating provides extreme chemical resistance, UV defense, ease of washing, and swirl resistance from maintenance washes.
How long must the car stay dry after ceramic coating?
Thanks to our short-wave infrared heat curing process, the initial cure takes just hours. However, we recommend avoiding water and chemical washes for 7 days while the quartz achieves full 9H cross-linked hardness.
Can ceramic coating be applied over existing scratches?
We never recommend applying ceramic coating over swirled or scratched paint because the clear quartz locks in those defects under glass. We always perform machine paint correction prior to ceramic application.
How do I maintain my ceramic coated vehicle?
Maintenance is remarkably easy: simply perform a pH-neutral two-bucket wash using deionized water. Avoid automatic tunnel car washes with abrasive nylon brushes. We also offer concierge maintenance wash packages.
Protect Your Investment with 9H Liquid Quartz
Book your Concours Ceramic & Quartz Shield online or request a custom package consultation from our Master Technicians.
Trusted Across Premier Automotive Engineering
Custom paint correction chemistry, ceramic coatings, and leather care formulated specifically for factory clear coats and exotic finishes.
































